www.rabbit.com low-cost single-board computer bl1800 jackrabbit? models | lp3500 | lp3510 | key features ? up to 29.5 mhz clock speed ? compact 3.5 x 2.5 size ? 4 serial ports ? multifunctional i/o ? analog input and outputs design advantages: ? easy development using rabbits dynamic c? programming language ? extensive library of drivers and sample programs are available ? proven hardware applications ? tank monitoring ? automatic meter reading ? remote monitoring and communications ? remote energy management ? security and surveillance the bl1800 jackrabbit is a small, easy-to-use, single-board computer that offers reliable hardware for embedded applications. the bl1800 delivers a rabbit? 2000 micro - processor operating at up to 29.5 mhz and 24 cmos-compatible i/o, 3 analog channels, and 4 high-power outputs, all on a 3.5 x 2.5: (89 x 64mm) pc board. three of the high-power outputs can sink up to one amp each and are protected for direct driving of inductive loads. there are two rs-232 ports and one rs-485 port support serial communication rated at 15 kv for esd protection. the fourth serial port is a 5 v cmos-compatible programming port that can also be used in the users application after program - ming is completed. five 8-bit timers and one 10-bit timer with two match registers are onboard. four of the 8-bit timers can be cascaded from the first timer. a real-time clock (rtc) provides time/date data, and a watchdog supervisor is standard. the bl1800 features a switching regulator that provides a wide range of input voltages (8C40 v dc), reducing power consumption while minimizing heat. (a linear regulator is featured on the bl1810 and bl1820 versions.) programming the bl1800 programs are developed and debugged with rabbits industry-proven dynamic c? software. the programming device is connected via a serial cable, a usb cable. comprehensive debugging support includes break points, watch expressions and many other extensive
rabbit? 2900 spaford street davis, ca 95618 usa tel 530.757.8400 fax 530.757.8402 copyright? 2008, rabbit. all rights reserved. rabbit is a digi international brand. rabbit and rabbitcore are trademarks or registered trademarks of rabbit. all other trademarks are the property of their respective owners. bl1800 jackrabbit? specifications feature bl1800 bl1810 bl1820 microprocessor rabbit ? 2000 @ 29.5 mhz rabbit ? 2000 @ 14.7 mhz flash eprom 256k (supports 128kC512k) 128k (supports 128kC512k) sram 128k (supports 32kC512k) backup battery 3 v lithium coin type, 950 mah, supports real-time clock and sram none digital inputs 6, cmos-level 7, cmos-level digital outputs 4 cmos-level plus 4 high-power outputs 3 sink up to 1 a and 30 v each, 1 sources up to 500 ma 4 cmos-level plus 4 high-power outputs 3 sink up to 200 ma and 30 v each, 1 sources up to 100 ma 5 cmos-level plus 4 high-power outputs 3 sink up to 200 ma and 30 v each, 1 sources up to 100 ma configurable i/o 14 cmos-level: 8 are bytewide, 6 are by bit 15 cmos-level: 8 are bytewide, 7 are by bit analog inputs one low-grade a/d inputinput range 0.1 v to 2.8 v, 9-bit resolution, 8-bit accuracy, 10 samples/s analog outputs two 9-bit filtered and buffered pwm outputs, one 0.1C2.8 v dc, one 0.7C3.5 v dc, update rate 50 hz serial ports up to four serial ports: ? two rs-232 or one rs-232 (with cts/rts) rated at 15 kv esd ? onw rs-485 rated at 15 kv esd (rs-485 driver not installed on bl1820) ? one 5 v cmos-compatible programming port ? two serial ports (a and b) can be clocked serial rate max. burst rate = clk/32 (async) max. sustained rate = clk/64 connectors two 2 20, 2 mm idc headers real-time clock yes timers five 8-bit timers (four cascadable from the first) and one 10-bit timer with two match registers watchdog/supervisor yes power 8C40 v dc, 1.2 w max., switching regulator 7.5C25 v dc, 100 ma, linear regulator operating temperature C40 c to +70 c humidity 5% to 95%, non-condensing board size 2.50 3.50 0.76 (64 mm 89 mm 19 mm) 2.50 3.50 0.94 (64 mm 89 mm 24 mm) 2.50 3.50 0.63 (64 mm 89 mm 16 mm) pricing price (qty. 1/25) part number $99/$87 20-101-0356 $69/$61 20-101-0357 $49/$43 20-101-0358 development kit part number $139 u.s. 101-0363 intl 101-0364 features oriented toward real-time embedded systems programming. an extensive library of drivers and sample programs is provided, including a royalty-free tcp/ip stack for network and internet communications as well as full source code for most library routines. development kit the bl1800 development kit contains software and hardware tools needed to begin design including a demo board, dynamic c? software and documentation on cd-rom, users manual with schematics, serial cable for programming and debugging, ac adapter (us/canada only), wiring assembly and friction-lock crimp pins and housings (standard crimping tool sold separately). 3.50 2.50
|
